Utilizing well-reservoir pseudo-connections for multi-stage hydraulic fracturing modeling in tight gas saturated formations

Oleh Lukin¹, Oleksandr Kondrat¹

¹Ivano-Frankivsk National University of Oil and Gas Ukraine, Ivano-Frankivsk, Ukraine

Min. miner. depos. 2024, 18(2):113-121

https://doi.org/10.33271/mining18.02.113

Full text (PDF)

ABSTRACT

Purpose. Research is aimed at integrating multi-stage hydraulic fracturing in horizontal wells with hydrodynamic simulation as a mandatory part of planning the mining of any shale oil or gas reservoir.

Methods. Geological and hydrodynamic reservoir modeling is part of the research. The properties and geometries of the hydraulic fracture network and its representation in the dynamic reservoir model were assessed. The comparative characterization was carried out based on the two methods of fracture modeling: cell dimension reduction for explicit fracture modeling (LGR – local grid refinement) and implicit fracture modeling method, presented in this paper, with additional pseudo-connections between well and reservoir.

Findings. A hydrodynamic model for low-permeable reservoir, produced by horizontal well, hydraulically fractured with 5 stages, has been generated. This model is calibrated to the production history and flowing bottom hole pressure by applying two methods of fracture modeling. Modeling results show that it is possible to replicate historical well production by using both methods. However, the proposed method with pseudo connections has several advantages compared to the generally accepted, local grid refinement (LGR) method.

Originality. For the first time, a system of pseudo connections between well and reservoir was constructed to model a multi-stage hydraulic fracturing for a hydrodynamic model of tight reservoir. Hydrodynamic simulation results were refined and calibrated to the history of hydrocarbon production and flowing bottom hole pressure data using the pseudo-connections and LGR methods. The similarity of the results by applying LGR and pseudo-connections methods was revealed.

Practical implications. The use of pseudo connections for hydraulic fracturing modeling can reduce simulation run time for cases where multi-stage hydraulic fracturing has already been carried out or is planned in the future. Additionally, the use of this method allows testing a larger number of realizations and scenarios, including hydraulic fracturing design (number of stages, size and conductivity of resulted fracture systems, fracture orientation, etc.), well placement and fracture growth relative to well trajectory. Also, there is no need to rebuild a model every time for each realization, as is the case with the LGR method.

Keywords: modeling, multi-stage fracturing, reservoir, gas, filtrationn

REFERENCES

Musa, I.H., Leem, J., Tan, C.P., & Che Yusoff, M.F. (2021). 3D Extended finite element modeling of hydraulic fracturing design and operation in shale gas reservoir and validation with micro-seismicity data. SPE Asia Pacific Oil and Gas Conference and Exhibition, D021S021R006. https://doi.org/10.2118/205631-MS
Gabry, M.A., Gharieb, A., Soliman, M.Y., Cipolla, C., Farouq-Ali, S.M., & Eltaleb, I. (2024). Calibration of continuous wavelet transform for dynamic hydraulic fracture propagation with micro-seismic data: Field investigation. SPE Hydraulic Fracturing Technology Conference and Exhibition, D021S006R006. https://doi.org/10.2118/217789-MS
Chakravarty, A., & Misra, S. (2023). Improved hydraulic fracture characterization using representation learning. SPE EuropEC-Europe Energy Conference featured at the 84th EAGE Annual Conference & Exhibition, SPE-214360-MS. https://doi.org/10.2118/214360-MS
Dai, C., Chang, H., & Fang, S. (2020). Recognize the spatial extent and properties of the hydraulic fracture network with multiple data. SPE Europec featured at EAGE Conference and Exhibition, D011S007R004. https://doi.org/10.2118/200641-MS
Yu, W., Sepehrnoori, K., & Patzek, T.W. (2016). Modeling gas adsorption in Marcellus shale with Langmuir and bet isotherms. SPE Journal, 21(2), 589-600. https://doi.org/10.2118/170801-PA
Belaifa, E., Abdelrahman, M.A., Almubarak, A.A., & Adebamiro, A.D. (2024). Automated workflow to couple hydraulic fracture modeling results into dynamic simulation process for unconventional reservoir. International Petroleum Technology Conference, D021S043R007. https://doi.org/10.2523/IPTC-24144-MS
Hegazy, A.M. (2024). Optimized pressure transient acquisitions improve development planning of tight rich gas fields in sultanate of Oman. International Petroleum Technology Conference, D031S104R003. https://doi.org/10.2523/IPTC-23180-MS
Xue, X., Yang, C., Onishi, T., King, M.J., & Datta-Gupta, A. (2019). Modeling hydraulically fractured shale wells using the fast-marching method with local grid refinements and an embedded discrete fracture model. SPE Journal, 24(6), 2590-2608. https://doi.org/10.2118/193822-PA
Sepehrnoori, K., Xu, Y., & Yu, W. (2020). Embedded discrete fracture modeling and application in reservoir simulation. Cambridge, United States: Elsevier, 304 p.
Zhang, R., Yu, W., Fiallos, T., Mauricio, X., & Sepehrnoori, K. (2021). Comparison of simulation results of EDFM and LGR for modeling fractures in shale reservoirs. ARMA US Rock Mechanics/Geomechanics Symposium, ARMA-2021.
Li, S., Zhao, H., Cheng, T., Wang, J., Gai, J., Zou, L., & He, T. (2023). The analysis of hydraulic fracture morphology and connectivity under the effect of well interference and natural fracture in shale reservoirs. Processes, 11(9), 2627. https://doi.org/10.3390/pr11092627
Wu, F., Li, D., Fan, X., Liu, J., & Li, X. (2020). Analytical interpretation of hydraulic fracturing initiation pressure and breakdown pressure. Journal of Natural Gas Science and Engineering, 76, 103185. https://doi.org/10.1016/j.jngse.2020.103185
Yan, Q., Zheng, W., Biniwale, S., Banerjee, R., Xu, T., & Rakhimova, Y. (2020). Can a cube model mitigate parent-child effects and improve oil recovery in the Permian Basin. SPE Asia Pacific Oil and Gas Conference and Exhibition, D023S011R004. https://doi.org/10.2118/202242-MS
Aly, M.A., Grilli, F., Radice, E., & Vecchio, E. (2023). Full field uncertainty quantification workflow for tight green fields with multi-stage hydraulic fracture wells. SPE Reservoir Characterisation and Simulation Conference and Exhibition, D031S018R003. https://doi.org/10.2118/212699-MS
Ruffino, R., Avanzini, A., Bianco, A., Marino, R., Bigoni, F., Albertini, C., & Tarantini, V. (2024). Novel workflow to properly assess the potential of a naturally fractured gas reservoir in a tight matrix sandstone. SPE EOR Conference at Oil and Gas West Asia, D021S026R001. https://doi.org/10.2118/218572-MS