Mining of Mineral Deposits

ISSN 2415-3443 (Online)

ISSN 2415-3435 (Print)

Flag Counter

Determination of the thermal state of a block gravel filter during its transportation along the borehole

Ihor Chudyk1, Diana Sudakova1, Andrii Dreus2, Artem Pavlychenko3, Andrii Sudakov3

1Ivano-Frankivsk National Technical University of Oil and Gas, Ivano-Frankivsk, Ukraine

2Oles Honchar Dnipro National University, Dnipro, Ukraine

3Dnipro University of Technology, Dnipro, Ukraine


Min. miner. depos. 2023, 17(4):75-82


https://doi.org/10.33271/mining17.04.075

Full text (PDF)


      ABSTRACT

      Purpose. Development of a methodology for determining the thermal state of block inverse gravel filters manufactured using low-temperature technology during their transportation in a well based on computer and mathematical modeling.

      Methods. The study of hydrodynamic processes occurring during the transportation of the filter in the borehole, as well as the calculation of thermal fields in the filter body, was performed using the Ansys Fluent software package. To determine the effective thermophysical characteristics of the filter, the approaches of the heat transfer theory in porous media were applied. To investigate the thermal conditions of the filter at heat exchange with well fluid, the use of analytical solution of the heat conduction problem in a cylindrical shell, taking into account the properties of porous dispersed water-saturated medium, is proposed.

      Findings. The methodology for calculating the thermal state of a gravel filter during its operation in a well has been developed. For estimation of the filter surface temperature, the expression obtained on the basis of the analytical solution of the heat conduction equation, taking into account the characteristics of the porous filter medium, is proposed. Hydrodynamic and thermal fields in the borehole and the filter body during the filter transportation process in the borehole have been obtained.

      Originality. For the first time, the problem of heat exchange of a gravel inversion filter, manufactured by low-temperature technology in a well is considered. The influence of hydrothermal conditions in the well on the process of filter heating during its transportation in the well is shown. The hydrodynamic fields during the flow of the drilling mud around the inverse gravel filter are determined.

      Practical implications. The proposed approaches and results of the study allow to determine and can be used in the development of technological regulations for the use of block gravel filters produced by low-temperature technology for the equipment of hydrogeological wells. The methodology for modelling the process of two-phase inversion transition of aggregate state of the binding agent during transportation of inverted block-type gravel filter during well construction has been developed.

      Keywords: well, binding agent, gravel filter, temperature field


      REFERENCES

  1. Bulat, А., Voloshyn, O., & Zhevzhik, O. (2013). Plasma reactor for thermochemical preparation of coal-air mixture before its burning in the furnaces. Annual Scientific Technical Collection – Mining of Mineral Deposits 2013, 39-44. https://doi.org/10.1201/b16354-8
  2. Koroviaka, Y.A., Mekshun, M.R., Ihnatov, A.O., Ratov, B.T., Tkachenko, Y.S., & Stavychnyi, Y.M. (2023). Determining technological properties of drilling muds. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (2), 25-32.https://doi.org/10.33271/nvngu/2023-2/025
  3. Shustov, O., Pavlychenko, A., Bondarenko, A., Bielov, O., Borysovska, O., & Abdiev, A. (2020). Substantiation into parameters of carbon fuel production technology from brown coal. Materials Science Forum, (1045), 90-101. https://doi.org/10.4028/www.scientific.net/MSF.1045.90
  4. Ratov, B.T., Fedorov, B.V., Omirzakova, E.J., & Korgasbekov, D.R. (2019). Development and improvement of design factors for PDC cutter bits. Mining Informational and Analytical Bulletin, 2019(11), 73-80. https://doi.org/10.25018/0236-1493-2019-11-0-73-80
  5. Hapich, H., Andrieiev, V., Kovalenko, V., Makarova, T. (2022). The analysis of spatial distribution of artificial reservoirs as anthropogenic fragmentation elements of rivers in the Dnipropetrovsk Region, Ukraine. Journal of Water and Land Development, (53), 80-85. https://doi.org/10.24425/jwld.2022.140783
  6. Ratov, B.T., Mechnik, V.A., Bondarenko, N.A., Kolodnitskyi, V.M., Kuzin, N.O., Gevorkyan, E.S., & Chishkala, V.A. (2021). Effect of vanadium nitride additive on the structure and strength characteristics of diamond-containing composites based on the Fe-Cu-Ni-Sn matrix, formed by cold pressing followed by vacuum hot pressing. Journal of Superhard Materials, 43(6), 423-434. https://doi.org/10.3103/S10-63457621060095
  7. Ratov, B.T., Bondarenko, N.A., Mechnik, V.A., Borash, A.R., & Muzapparova, A.B. (2022). A study of the structure and strength properties of the WC-Co drill insert with different CrB2 content sintered by vacuum hot pressing. SOCAR Proceedings, (1), 37-46. https://doi.org/10.5510/OGP20220100626
  8. Orlinska, O., Pikarenia, D., Chushkina, I., Maksymova, N., Hapich, H., Rudakov, L., Roubík, H., & Rudakov, D. (2022). Features of water seepage from the retention basins of irrigation systems with different geological structures. AIP Conference Proceedings, (26763), 0600022021. https://doi.org/10.1063/5.0109330
  9. Pavlychenko, A.V., Ihnatov, A.O., Koroviaka, Ye.A., Ratov, B.T., & Zakenov, S.T. (2022). Problematics of the issues concerning development of energy-saving and environmentally efficient technologies of well construction. IOP Conference Series: Earth and Environmental Science, (1049), 012031. https://doi.org/10.1088/1755-1315/1049/1/012031
  10. Dong, G., & Chen, P. (2018). 3D numerical simulation and experiment validation of dynamic damage characteristics of anisotropic shale for percussive-rotary drilling with a full-scale PDC bit. Energies, 11(6), 1326. https://doi.org/10.3390/en11061326
  11. Mechnik, V.A., Bondarenko, N.A., Kolodnitskyi, V. M., Zakiev, V.I., Zakiev, I.M., Ignatovich, S.R., Dub, S.N., & Kuzin, N.O. (2020). Effect of vacuum hot pressing temperature on the mechanical and tribological properties of the Fe-Cu-Ni-Sn-VN composites. Powder Metallurgy and Metal Ceramics, 58(11-12), 679-691. https://doi.org/10.1007/s11106-020-00125-w
  12. Kryzhanivskyi, Ye.I., Vytyaz, O.Yu., Tyrlych, V.V., Hrabovskyy, R.S., & Artym, V.I. (2021). Evaluation of the conditions of drill pipes failure during tripping operations. SOCAR Proceedings, (1), 36-48.
  13. Femyak, Ya.M., Femiak, V.Ya., Kovbsiuk, I.M., Martsynkiv, O.B., & Vytvytskyy, I.I. (2019). Evaluation of the influence of geological-technical factors on the durability of casing columns in oil and gas wells. Monitoring of Geological Processes and Ecological Condition of the Environment, 1-5. https://doi.org/10.3997/2214-4609.201903220
  14. Femyak, Ya.M., Riznychuk, A.I., Fedoriv, V.V., Charkovskyi, V.M., Deineha, R.O., & Stetsiuk, R.B. (2021). Technical and technological solutions to prevent destruction of the walls of directional wells in the mining and geological conditions of Ukrainian fields. Monitoring of Geological Processes and Ecological Condition of the Environment.
  15. Ziaja, J., Stryczek, S., Jamrozik, A., Knez, D., Czarnota, R., & Vytyaz, O. (2017). Sealing slurries limiting natural gas exhalations from the annular space of a wellbore. Przemysl Chemiczny, 96(5), 990-992. https://doi.org/10.15199/62.2017.5.9
  16. Ovetska, O., Ovetskyi, S., & Vytiaz, O. (2021). Conceptual principles of project management for development of hydrate and other unconventional gas fields as a component of energy security of Ukraine. E3S Web of Conferences, (230), 01021. https://doi.org/10.1051/e3sconf/202123001021
  17. Fedorov, B., Ratov, B., & Sharauova, A. (2017). Development of the model of petroleum well boreability with PDC bore bits for Uzen oil field (the Republic of Kazakhstan). Eastern-European Journal of Enterprise Technologies, 3(1(87)), 16-22. https://doi.org/10.15587/1729-4061.2017.99032
  18. Khomenko, O., Kononenko, M., Kovalenko, I., & Astafiev, D. (2018). Self-regulating roof-bolting with the rock pressure energy use. E3S Web of Conferences, (60), 00009. https://doi.org/10.1051/e3sconf/20186000009
  19. Pivnyak, G., Dychkovskyi, R., Bobyliov, O., Cabana, E.C., & Smoliński, A. (2018). Mathematical and geomechanical model in physical and chemical processes of underground coal gasification. Solid State Phenomena, (277), 1-16. https://doi.org/10.4028/www.scientific.net/SSP.277.1
  20. Zhanchiv, B., Rudakov, D., Khomenko, O., & Tsendzhav, L. (2013). Substantiation of mining parameters of Mongolia uranium deposits. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (4), 28-35.
  21. Chernova, M., Кuntsyak, Y., Ratov, B., Sudakov, A., & Nuranbayeva, B. (2022). Substantiation of the use of polymer-composite materials, which reduce the influence of dynamic friction forces of macrostructural surfaces, when drilling wells. International Multidisciplinary Scientific GeoConference, 21(1.2), 917-925. https://doi.org/10.5593/sgem2021/1.1/s06.111
  22. Sadovenko, I.O., Zahrytsenko, A.M., Podvihina, O.O., & Dereviahina, N.I. (2017). Water balance control within rock mass using the capacity of water-bearing formations. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 4(160), 19-26.
  23. Chudyk, І.І., Femiak, Ya.M., Orynchak, М.І., Sudakov, A.K., & Riznychuk, А.І. (2021). New methods of preventing crumbling and collapse of the borehole walls. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (4), 17-22. https://doi.org/10.33271/nvngu/2021-4/017
  24. Shyrin, L., Koroviaka, Ye., Rastsvietaiev, V., & Denyshchenko, O. (2018). Substantiating rational parameters of a method for shrinkage ore stoping while developing thin-vein steeply inclined deposits. E3S Web of Conferences, (6016), 00022. https://doi.org/10.1051/e3sconf/20186000022
  25. Biletskiy, M.T., Ratov, B.T., Khomenko, V.L., Borash, B.R., Borash, A.R. (2022). Increasing the mangystau peninsula underground water reserves utilization coefficient by establishing the most effective method of drilling water supply wells. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, (5), 51-62. https://doi.org/10.32014/2518-170X.217
  26. Kozhevnikov, A.A., Sudakov, A.K., Dreus, A.Yu., & Lysenko, Ye.Ye.  (2014). Study of heat transfer in cryogenic gravel filter during its transportation along a drillhole. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (6), 49-54.
  27. Borash, B.R., Biletskiy, M.T., Khomenko, V.L., Koroviaka, Ye.A., & Ratov, B.T. (2023). Optimization of technological parameters of airlift operation when drilling water wells. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (3), 25-31. https://doi.org/10.33271/nvngu/2023-3/025
  28. Ihnatov, A.O., Koroviaka, Y.A., Haddad, J., Tershak, B.A., Kaliuzhna, T.M., & Yavorska, V.V. (2022). Experimental and theoretical studies on the operating parameters of hydromechanical drilling. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (1), 20-27. https://doi.org/10.33271/nvngu/2022-1/020
  29. Ihnatov, A., Haddad, J.S., Koroviaka, Ye., Aziukovskyi, O., Rastsvietaiev, V., & Dmytruk, O. (2023). Study of rational regime and technological parameters of the hydromechanical drilling method. Archives of Mining Sciences, 68(2), 285-299. https://doi.org/10.24425/ams.2023.146180
  30. Kozhevnykov, A., Khomenko, V., Liu, B., Kamyshatskyi, O., & Pashchenko, O. (2020). The history of gas hydrates studies: From laboratory curiosity to a new fuel alternative. Key Engineering Materials, (844), 49-64. https://doi.org/10.4028/www.scien-tific.net/KEM.844.49
  31. Kovbasiuk, I.M., Martsynkiv, O.B., Femiak, Y.M., Vytvytskyi, I.I., & Zhdanov, Y.D. (2020). Research of the stressed state of saline rocks of prykarpattia deposits under the influence of thermobaric conditions. Monitoring of Geological Processes and Ecological Condition of the Environment, 1-5. https://doi.org/10.3997/2214-4609.202056048
  32. Vytyaz, O., Hrabovskyy, R., Artym, V., & Tyrlych, V. (2020). Effect of geometry of internal crack-like defects on assessing trouble-free operation of long-term operated pipes of drill string. Metallofizika i Noveishie Tekhnologii, 42(12), 1715-1527. https://doi.org/10.15407/mfint.42.12.1715
  33. Maksymovych, O., Solyar, T., Sudakov, A., Nazar, I., & Polishchuk, M. (2021). Determination of stress concentration near the holes under dynamic loadings. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (3), 19-24. https://doi.org/10.33271/nvngu/2021­3/019
  34. Maksymovych, O., Lazorko, A., Sudakov, A., Hnatiuk, O., Mazurak, A., & Dmitriiev, O. (2021). Stress concentration in bounded compositeplates with carbon reinforcement. Actual Challenges in Materials Science and Processing Technologies II. Advanced Materials Research, (1045), 147-156. https://doi.org/10.4028/www.scientific.net/MSF.1045.147
  35. Zhang, M., Zhang, X., Lu, J., Pei, W., & Wang, C. (2019). Analysis of volumetric unfrozen water contents in freezing soils. Experimental Heat Transfer, 32(5), 426-438. https://doi.org/10.1080/08916152.2018.153-5528
  36. Li, S., Zhang, M., Pei, W., & Lai, Y. (2018). Experimental and numerical simulations on heat-water-mechanics interaction mechanism in a freezing soil. Applied Thermal Engineering, (132), 209-220. https://doi.org/10.1016/j.applthermaleng.2017.12.061
  37. Rempel, A.W. (2012). Hydromechanical processes in freezing soils. Vadose Zone Journal, 11(4). https://doi.org/10.2136/vzj2012.0045
  38. Hou, S., Yang, Y., Cai, C., Chen, Y., Li, F., & Lei, D. (2022). Modeling heat and mass transfer during artificial ground freezing considering the influence of water seepage. International Journal of Heat and Mass Transfer, (194), 123053. https://doi.org/10.10-16/j.compgeo.2015.11.014
  39. Tamizdoust, M.M., & Ghasemi-Fare, O. (2019). Numerical analysis on feasibility of thermally induced pore fluid flow in saturated soils. Geo-Congress 2019: Geotechnical Materials, Modeling, and Testing, 73-82. https://doi.org/10.1061/9780784482124.009
  40. Pavlenko, А.М., Koshlak, H.V., Cheilytko, A.O., Nosov, M.A., & Syzonenko, A.V. (2019). Research of effective thermal conductivity and its parts in porous metallic materials with different parameters of porosity. Metal Journal, Metallurgical and Mining Industry, (12), 66-75.
  41. Sudakov, A., Dreus, A., Ratov, B., Sudakova, О., Khomenko, O., Dziuba, S., Sudakova, D., Muratova, S., & Ayazbay, M. (2020). Substantiation of thermomechanical technology parameters of absorbing levels isolation of the boreholes. News of the National Academy of Sciences of the Republic of Kazakhstan, Series of Geology and Technical Sciences, 2(440), 63-71. https://doi.org/10.32014/2020.2518-170X.32
  42. Sudakov, A., Chudyk, I., Sudakova, D., & Dziubyk, L. (2019). Innovative isolation technology for swallowing zones by thermoplastic materials. E3S Web of Conferences, (123), 01033. https://doi.org/10.1051/e3sconf/201912301033
  43. Sudakov, А., Dreus, A., Kuzin, Y., Sudakova, D., Ratov, B., & Khomenko, O. (2019). A thermomechanical technology of borehole wall isolation using a thermoplastic composite material. E3S Web of Conferences, (109), 00098. https://doi.org/10.1051/e3sconf/2019109-00098
  44. Dreus, A.Yu., Sudakov, A.K., Kozhevnikov, A.A., Vakhalin, Yu.N. (2016). Study on thermal strength reduction of rock formation in the diamond core drilling process using pulse flushing mode. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, (3), 5-10.

    45. Лицензия Creative Commons

Copyright © 2023 Dnipro University of Technology

Underground Mining Department

All Rights Reserved.

Journal homepage Authors